-40%
Midland 90-2271 P25 Mobile Radio Transceivers Accessory Ignition Sense Cable 20'
$ 5.02
- Description
- Size Guide
Description
Midland 90-2271 P25 Mobile Radio Transceivers Accessory Ignition Sense Cable 20 Feet1007 E72332-4 ЯU AWM 18AWG VW-1 80° C 300V UNICAB CSA Type LL47556 TR-64 18AWG FTI 90° C -F- LM 20 Feet
Ignition Sense Kit
For STM Series P25 Mobile Transceivers
The 90-2271 Ignition Sense Kit may be installed on STM series P25 mobile radios so they automatically turn-off when the vehicle’s ignition is turned off. The operator does not have to remember to turn the radio off when exiting the vehicle, and the radio will not drain the vehicle battery if the operator forgets to turn it off.
! Beginning with version MDV 1.00.2043 radio firmware the “Command Input” may be programmed as a PTT input or an ignition sense input. On the MRP_P25 Private Parameters|General Parameters screen (version 1.04.007 and above), select “Ignition Sense” as the “Command Input” for any mobile radios that will be using ignition sense.
The key to installation is to locate the appropriate point at the vehicle’s fuse block for connection of the ignition sense wire. Use a voltmeter to determine if the connection point is on/off when the ignition switch is in the appropriate position. If it is desired to operate the radio while the engine is off, make the connection to a point that is switched to a +12V fused connection when the ignition switch is in the “accessory” position. Otherwise, make the connection to a point that is switched to fused +12V when the ignition switch is in the “run” position. The connection point should be less than 1V when the ignition switch is in the “off” position.
Once the appropriate connection point is located, route the wire from the back of the radio to the fuse block and apply a suitable termination to the ignition sense wire to make the connection to the fuse block.
There are numerous taps and connectors available to make the connection to the fuse block easier and more secure. A Fused connection is highly recommended.
To connect the ignition sense wire to the radio, align the arrow on the ignition sense connector with the arrow (triangle) on the radio option connector and push the connector until it locks in place. To unplug the connector, pull back on the collar, in a manner similar to an air hose quick connect.
Once all radio and power connections are secure, check the operation as follows:
1. Turn the ignition switch on.
2. Press and release the radio on/off switch to turn the radio on. The radio should perform a power-on self-test and turn on.
3. Turn the ignition switch off. After a few seconds the radio should turn off.
4. Turn the ignition switch back on. The radio should turn on.
5. The radio’s on/off switch may always be used to turn the radio on or off and override the ignition sense logic. The radio will only turn on with the ignition sense logic, if it turned off by the ignition sense. If you use the on/off switch to turn the radio off, you must also turn the radio back on with the on/off switch.
6. After several days in the ignition off state, the radio will turn off completely to conserve the vehicle battery. In this case, press and release the radio’s on/off switch to turn the radio back on.
! If the radio does not turn on when the ignition is turned on, press and release the radio’s on/off switch to turn it on. See the above notes for possible causes.
Shipping Policies
• We take great care packaging every item to ensure safe quality shipping.
• We ship UPS/USPS/FedEx/DHL depending on your location and at our discretion.
• Most shipments are sent out within 1-2 business day after payment is confirmed or cleared, unless stated otherwise in the listing.
• Please make sure to provide the correct shipping address when placing your order, orders can only be shipped out to the confirmed shipping address provided by eBay.
• Packages are not shipped on Sunday. Transit time varies and vary by carrier, we cannot control delays caused by carriers.
• Shipping time provided by eBay is an estimation and is not guaranteed. Also subject to change especially during peak periods.
• Buyers are responsible for complying with all import and export obligations and for payment of all applicable duties and custom fees.
• Orders shipping to Hawaii, Puerto Rico, Guam or Alaska may not select the Free Shipping option for this item, if free shipping is selected for one of these destinations we reserve the right to cancel your order.
Return Policies
Items must be returned in the original manufacturer's packaging. We strongly recommend you keep your packaging for at least the first 30 days after purchase.
• We offer a 30 day return policy on all items. (unless stated otherwise in the listing).
• Video games must be returned unopened. If the item is defective, it can be returned within 15 days with a receipt and the original packaging.
Defective items may only be exchanged for the same title.
• All returns must be in original condition and must include the original packaging and content in tact.
• Returns must be packed in proper packaging to avoid damage to the item or it original packaging.
• For any return request please contact us to receive a RMA number and return instructions.
• 10% - %20 restocking fee may apply.
• Please allow 3-5 business days after we receive your package to process your return.
• Any returns that violate this return policy will not be accepted and will be sent back at customers expense.
The following electronics items must be returned within 15 days of receipt:
Computers, Computer hardware, Printers (including 3D printers), 3D printing supplies and products, Camcorders, Digital cameras, GPS units, Digital music players, Tablets, E-readers, Portable video players, Drones, Video Game Consoles, Video Games
Contact US
• We take joy in helping you get the gear you want at at the price you need!
• Please don't hesitate to contact us with any questions or concerns.
• You can contact via ebay message
Please note that most of the product images and description are provided to us by the manufacturer and sometimes do not represent the exact color, size, style or of the actual item.